The stock read must be done as a GPEC2A, 2015+ Dodge or a GPEC2, 2015+ Dodge (depending on which PCM the vehicle is equipped with. If you can supply a stock read, we can flash the PCM here. While we can upgrade it as a blank PCM without a read, you would have to flash the correct OS/VIN onto the PCM as well as most likely do a throttle re-learn and/or SKIM re-learn. Any spare or non-original PCMs will need to be programmed to the vehicle before or after upgrade by HP Tuners-this is the responsibility of the customer.
*Gen 3 EcoDiesel PCMs cannot be read prior to upgrade.
This read must be uploaded before adding the Upgrade service to the cart. As of, ALL non-original 2015+ Dodge/Chrysler/Jeep/RAM PCMs that are sent in for upgrade must have a stock read performed before it is shipped to us.The EDC17C79 PCM will update upon the first read of the ECM which will allow read/write abilities. EDC17C79 PCMs installed in 2014 to 2019 Jeep/Dodge/Ram vehicles do not need to be upgraded.In addition to this service, all 2018+ models require an HP Tuners Dodge 2018+ Smart Access Cable. Please note this service is required to tune your 2015+ Dodge/Chrysler/Jeep/RAM (all FCA models, except the 2015+ Dodge Viper and 2014 to 2019 Jeep/Dodge/Ram vehicles with the EDC17C79 PCM).
